Bevelling machine CHP-60G

High-precision machine for heavy-duty production

State-of-the-art portable milling &beveling machine with utmost capacities.

You are here

CEVISA CEVISA CHP-60G CEVISA

Cevisa innovates further and creates new class of self-feed beveling machine with the launch of the CHP-60G heavy duty beveling machine. Today it is the most significant advance in mechanized high capacity bevellers, specially developed for largethicknesses and hard steel, merging 2 technologies in one: world unique portable milling and beveling machine with up to 100 mm thick plates. Suitable for duplex, super duplex, hardox, armox…

The CHP-60G is designed to handle extremely demanding welding tasks by giving user shigher bevelling precision, speed performance and quality, fulfilling needs thanks to its angles, width and cut accuracy adjustments.

Benefits of large thicknesses milling cutting bevelling machine CHP-60G

  • Universal: Designed to bevel any hard material and thicknesses up-to 100 mm
  • High precision beveller: electronic display screens to adjust bevel width and feed& speed rates
  • Increaseding productivity: perfect surface finishing, no steel alteration & no need to grind after bevelling process
  • High ROI: Beveling with the CHP-60G while cutting plates, low cost rate bevel/min., added value for high precision bevel.
  • Extremely stable machining process: The combination of feeding rollers and 4 bars fixing system held pressure in plates leads to zero vibration & a perfect finish.
  • Reliability: high performance speed for any kind of material and bevel width (mild steel, hardox, hastelloy, duplex, super, duplex…).

Special tool for J-Bevels (see accessories)

Data sheet
1.0Mb
Bevelling machine CHP-60G
Technical details
Performances
  • 60 mm bevel length
  • Capability in one run: 28 mm bevel lenght
  • Bevel finish: machined (milling head)
  • Adjustable bevel speed depending on the material
  • Optimum bevelling speed: 500 mm / min
  • Continual plate fixing pressure system: 4 Bar
  • 3 feeding rollers always in contact with the plate, 1 roller positioned in the cut-off point to insure: - no vibration, no noise, -smooth and unchanging finish
  • Portable milling machine
  • Mobile and stable
  • Adjustable working height with pneumatic lifting system
  • Electronic bevel adjustment display: high precision
  • Built-in adjustable bevel angles from 15º to 70º

* Nominal thickness: from 10 mm to 100 mm.

Specifications

Motor: three-phase
Motor power: 5 CV – 3,8 kW

Voltage:

  • 220/380 V. 50 Hz
  • 250/440 V. 60 Hz
  • For other voltages, please consult us

Electric box with

  • Thermomagnetic switch trip
  • Emergency stop button

Net weight: 800 kg
Works height: adjustable from 760 to 940 mm
Built-in trolley

Bevel blueprint

Plate bevelling: K, V, X and Y bevels.
Bevel speed: 0,5 m/min.

Conexión eléctrica

Three-phase motor: three phases and earth. no neutral.
Motor power: 5 hp - 3.8 kW.
Voltage: 220/380 V. 50 Hz 250/440 V. 60 Hz
Any other voltage, check availability
32 A plug.
Cable diameter: 2.5 millimetres.
Maximum consumption of the machine: max. 15A.
Air flow rate 200 l/min.

Electrical box:

With undervoltage trip.
Emergency stop button
Magneto-thermal protection
Net weight of the bevelling machine: 800kg
Working height: adjustable from 760 to 940 millimetres.
Integrated carriage.

 

CEVISA's advantages
  • Universal: Designed to bevel any hard material duplex, hardox, carbon steel… and thicknesses up-to 100 mm
  • High precision beveller: electronic display screens to adjust bevel width and feed& speed rates, up to 60 mm machined bevel
  • Increased productivity: perfect machined finishing, no steel alteration & no need to grind after bevelling process
Accessories
Cevisa's beveling machine is provided with
  • 2 sets of 10 inserts (7 on machine)
  • 1 milling head
  • 1 set of spanners for the machine adjustment
Extras & consumables:
  • Indexable inserts
  • Plastic rollers to avoid material marking
  • J-Bevel device

More information about the device in “J”:

It is a device that is pre-installed at the factory. The advantage is that once this device is installed you can make both a “J” chamfer and a normal one.

The values ​​are as follows:

Thickness max. sheet thickness is 70mm with the standard machine, 100mm with special configuration.
The chamfer angle at J is 15-30 °.
Depth max. chamfering in J in several passes of 57.5 mm at 15º and 49.8 mm at 30º.

Videos